Chararcteristics		• compact
		• cylindrical shape
Dimensions (mm)		Ø40
Height		19
Max. torque (cNm)1)		20
Ratios		6,25…2250
Internal slipping clutch		–
Standard shaft (mm)		Ø 3 x 10
Weight (g)		depends on ratio

Chararcteristics		• plastic gears
		• wide range of ratios
		• gears rotate on hardened steel axles
		• optional integrated slipping clutches
Dimensions (mm)		55 x 62 / 65.6
Height		12/13
Max. torque (cNm)		32
Ratios		A: 4 1/6...360.000
		D: 4 1/6...6.048.000
Internal slipping clutch		optional
Standard shaft (mm)		Ø 4 x 10
Weight (g)		55 / 35

Chararcteristics		• cylindrical 52 mm diameter design
Dimensions (mm)		Ø52
Height		20
Max. torque (cNm)		40
Ratios		6,25…1875
Internal slipping clutch		–
Standard shaft (mm)		Ø 3 x 10
Weight (g)		depends on ratio

Chararcteristics		• volume metal and plastic spur gears
		• harded steel shafts encluded in plastic housing and metal plate
Dimensions (mm)		51 x 65.2
Height		15
Max. torque (cNm)		100
Ratios		12.5…4800
Internal slipping clutch		–
Standard shaft (mm)		Ø 4 x 10
Weight (g)		45

Chararcteristics		• robust metal spur gears
		• plastic primary gears
		• die- cast aluminium housing
Dimensions (mm)		58 x 81
Height		17
Max. torque (cNm)		250/500
Ratios		B: 41 2/3...345.600
		F: 4 1/6...5000
Internal slipping clutch		optional (UGB)
Standard shaft (mm)		Ø 8 x 12
Weight (g)		130

Chararcteristics		• solid metal spur gears
		• die- cast aluminium housing
Dimensions (mm)		70 x 70
Height		17
Max. torque (cNm)		500
Ratios		8 1/3...2.000
Internal slipping clutch		–
Standard shaft (mm)		Ø 8 x 12
Weight (g)		130

Chararcteristics		• high performance hardened steel spur gears
		• low teeth profile
		• optional interface plates for DC motors
		• optional additional housing for IP 65
Dimensions (mm)		Ø65 / 68x68
Height		30-382)
Max. torque (cNm)		600
Ratios		6.25...5400
Internal slipping clutch		–
Standard shaft (mm)		Ø 8 x 22
Weight (g)		depends on ratio

Chararcteristics		• the most extensive gear ratio range
		• medium torque two plate gear type with metal spur gears
Dimensions (mm)		65 x 107
Height		28
Max. torque (cNm)		1500
Ratios		4 1/6...36 Mill.
		= 2500 with UGD
Internal slipping clutch		-
Standard shaft (mm)		Ø 12 x 20
Weight (g)		480

Chararcteristics		• high performance metal gear type
		• robust aluminium twin plate design
		• can be used with DC motors
Dimensions (mm)		70 x 130
Height		38
Max. torque (cNm)		2000
Ratios		6.25…375
Internal slipping clutch		–
Standard shaft (mm)		Ø 12 x 35
Weight (g)		depends on ratio

Chararcteristics		• high torque spur gears type
Dimensions (mm)		70x100
Height		36
Max. torque (cNm)		2500
Ratios		125…1500
Internal slipping clutch		–
Standard shaft (mm)		Ø 12 x 35
Weight (g)		depends on ratio